Home > Gaco Western Roofing Products > Silicone > Flashfoam

Flashfoam

GacoFlashFoam is a high density, 3 lb. closed cell polyurethane foam designed for use as spray-applied flashings at curbs, parapets, walls and penetrations prior to application of GacoFlex Coatings. GacoFlashFoam bonds to any shape or substrate and eliminates common sources of leaks often experienced with other flashings. It may also be used to repair existing spray foam roofing systems.

GacoFlashFoam is a high density, 3 lb. closed cell polyurethane foam designed for use as spray-applied flashings at curbs, parapets, walls and penetrations prior to application of GacoFlex Coatings.

GacoFlashFoam is a high density, 3 lb. closed cell polyurethane foam designed for use as spray-applied flashings at curbs, parapets, walls and penetrations prior to application of GacoFlex Coatings. It is packaged in a convenient self-contained kit that does not need power; it is light and portable, just carry it in one hand and spray with the other.

Category:
Downloadable PDF's

Benefits

PORTABLE AND CONVENIENT. The convenient 41 lb. self-contained kit does not need power and is light and portable. Carry it in one hand and spray with the other.

EASY TO INSTALL. GacoFlashFoam provides an economical, efficient and superior alternative to labor intensive seam tapes.

ADHERES TO A VARIETY OF SUBSTRATES. GacoFlashFoam bonds to any shape or substrate to eliminate common sources of leaks often experienced with other flashings. It may also be used to repair existing spray foam roofing systems.

INCREASED COVERAGE. GacoFlashFoam covers 120 board feet at 1ʺ and has an R-Value of 6.5 at 1ʺ.

WORKABILITY. GacoFlashFoam was designed to be part of a full system of integrated GacoFlex products, making it the first spray foam ideal for use with all GacoFlex coatings.

Video

Related Products

  • GacoFlex-E5320-Application-1-487x365 +

    2-Part Epoxy Primer/ Filler

    GacoFlex E5320 is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered surfaces that are difficult to get completely clean.

    On asphalt-based surfaces it may help prevent bleed-through, and when top coated will help prevent corrosion. When mixed with ordinary sand, it’s a masonry block filler.

    Part #: N/A
  • GacoPatch-Application-2 +

    GacoPatch

    GacoPatch is a flashing grade, standalone silicone roof patch designed to provide a long lasting solution for a leaking roof. The convenient wide top pail makes GacoPatch application easy to do with a trowel or a brush. GacoPatch is a one step application which eliminates the cost of additional products such as primers, seam tapes or top coats.

    New and improved technology allows for GacoPatch to be the long term solution for roof repairs. It does not contain asphalts or acrylics and it is extremely durable. GacoPatch remains permanently flexible even under permanent ponding water. It is UV stable and will not chalk, crack or peel. No reinforcements or extra steps are required for horizontal patches, even over 1/2″ thick, because GacoPatch resists degradation over time and will not become brittle or break down.

    Part #: N/A
  • Placeholder +

    GacoFlexSF2036 Walkpad

    Part #: N/A
  • Placeholder +

    LiquidRoofTape

    Part #: N/A
  • GacoRoof-5gal-Product-Photo-304x365 +

    GacoRoof

    GacoRoof 100% Silicone Roof Coating creates a seamless membrane to seal and repair existing roofs and permanently protect against leaks, permanent ponding water and the damaging effects of severe weather. GacoRoof is available in several colors to enhance the aesthetics of any roof. Ideal for use on flat and sloped roofs including, but not limited to, large and small buildings, homes, garages and patio covers, sheds and barns, mobile homes, RVs and more.

    Part #: N/A
  • GacoFlex-SF2000-Product-Photo-365x365 +

    GacoFlex SF2000 SeamSeal

    GacoFlex SeamSeal, a silicone-based, solvent-free sealant combined with a reinforcing agent, adheres to seams, fasteners and other roof details in a single application. GacoFlex SeamSeal transforms a roof with seams, gaps, and overlaps into a seamless foundation ready for coating with GacoFlex Solvent-Free 100% Silicone Coating.
    GacoFlex SF2000 SeamSeal is a silicone-based, solvent-free, single-component waterproof elastomeric moisture-curing sealant combined with a reinforcing agent.

    SeamSeal is intended for application over cleaned and primed roofs as a joint and fastener treatment in place of fabric and/or elastomeric sheet tape. It may also be used to repair blisters in spray polyurethane foam up to 4” in diameter, as a tape-seal over cracked polyurethane foam insulation, and as filler for applications over existing “alligatored” smooth BUR. SeamSeal is UV stable and may be used to repair most clean and dry roofing surfaces. It can also serve as a substitute for caulk on a variety of substrates.

    • 100% silicone solvent-free sealant
    • 1 coat on smooth surfaces. 2 coats on granulated and rough surfaces.
    • Limitations: Not intended to be used to repair blisters in polyurethane foam larger than 4” in diameter.
    • Mixing: Mix before application to ensure uniform color and consistency.
    • Thinning: Product should not be thinned.
    • Primer: Existing silicone coatings should not be primed. On all other substrates, apply GacoFlex E5320 2-Part Epoxy Primer/Filler according to label directions.
    • Dry Time: Allow to dry a minimum of 4 hours at 55°F (13°C) or higher before coating with GacoFlex Solvent-Free Silicone Coating (product is moisture cure, low humidity will result in longer dry times); coat within 4 to 48 hours.
    • Clean Up: Clean application tools and equipment with 100% Pure Mineral Spirits Recirculate through lines and gun until residual coating is removed. DO NOT USE WATER OR RECLAIMED SOLVENTS.
    Part #: N/A