Home > Spray Foam Materials

Spray Foam Materials

Items(23)

  • spray +

    2.8 lb Premium Roof Foam

    Premium Spray Products, Inc. PREMISEAL™ 280 is a two-component one to
    one by volume, spray applied polyurethane foam. The PREMISEAL™ 280 liquid A component
    (Iso) and B component (Resin) are mixed through specialized proportioning spray equipment to
    produce a fast curing rigid foam plastic insulation. PREMISEAL™ 280 utilizes an EPA approved,
    zero ozone depleting blowing agent.

    GENERAL PROPERTIES:

    PREMISEAL™ 280 is a nominal 2.8lb/cu ft. density closed cell
    polyurethane foam roofing system intended for use by qualified contractors trained in the
    processing and application of spray polyurethane foam. PREMISEAL™ 280 provides a superior
    R-value of 6.4 per inch thickness and a continuous insulation without thermal breaks. The
    PREMISEAL™ Roofing system provides an excellent self-adhering qualities with superior
    wind uplift, is self-flashing and seamless and with its closed cell nature provides a durable leak
    resistant roofing system. Its superior strength provides excellent resistance to foot traffic and
    abuses. The PREMISEAL™ 280 roofing system can be used in most retrofit or new construction
    applications.

    RECOMMENDED USES:
    PREMISEAL™ 280 is designed for use as a roofing system in
    commercial, industrial and institutional construction applications. PREMISEAL™ 280 is suitable
    for application to most construction materials including wood, masonry, concrete, metal, and
    most roofing board stock materials. PREMISEAL™ 280 can be applied to clean, dry and sound
    roofing surfaces such as BUR, mod bit, metal, concrete, single-ply and other properly prepared
    roofing systems.

    Part #: N/A
  • DSC04138 +

    3.0 lb BASF Roof Foam

    The Sprayed Polyurethane Foam Insulation Roofing System is a system intended for institutional, commercial, industrial flat roofing. A 3 lb. high-density polyurethane foam insulation is used for the SPF Roofing System. It provides a gap-free, airtight, monolithic envelope of low permeability that adheres tenaciously to virtually all surfaces, smooth or irregular. The spray applied system with 3 lb. polyurethane foam insulation and aluminum polyurea coating allows for a complete seal of the existing or new roof to prevent moisture, deterioration, and penetration of existing or new roofing membrane. See the

    Part #: N/A
  • Placeholder +

    3.0 lb Demilec Roof Foam

    Part #: N/A
  • agri +

    Agribalance

    Agribalance® merges our high-performing, open-cell spray foam insulation with natural, renewable oils. This allows architects, builders, contractors, and homeowners to achieve new standards of performance, quality, and energy efficiency.

    This high R-value of 4.45 at 1 inch, polyurethane insulation expands to seal cracks, gaps, and voids in attics, walls, crawl spaces, and ceilings. Agribalance is a three-quarter pound density foam that reduces air leakage by improving energy efficiency, and reducing moisture intrusion and outside contaminants such as dust, dirt, and allergens. As a result, builders can generally install smaller, more energy-efficient HVAC systems and achieve similar, or superior comfort compared to traditionally insulated structures which require a larger, less efficient HVAC system – resulting in higher energy costs.


    Benefits of Agribalance:

    • Developed with 20% of Agri-based
    • Renewable materials
    • Decreases dust and air pollutants
    • Maximizes energy efficiency
    • Minimizes noise disturbance
    • Contains no ozone-depleting chemicals, Gases, Fibers, or asbestos

    Since it tightly bonds to surfaces in the attic, ceiling, and walls, extraneous noise is also minimized. Agribalance is in compliance with the International Building Code® (IBC), the International Residential Code® (IRC), and the International Energy Conservation Code® (IECC).

    Agribalance is also a USDA Bio-Preferred Product and an NAHB Research Center Green Approved Product.

    Part #: N/A
  • Placeholder +

    BASF

    Part #: N/A
  • Placeholder +

    BASF

    Part #: N/A
  • Placeholder +

    Demilec

    Part #: N/A
  • enertitewebphotocropped +

    Enertite

    ENERTITE is a low-density open-cell spray applied polyurethane foam (SPF) insulation. Applied as a liquid, this water-blown foam quickly expands to many times its original size completely filling wall cavities. ENERTITE easily flows in and around difficult-to-reach areas such as pipes and wiring, creating a seamless seal.

    ENERTITE can be used to improve energy efficiency or to provide a barrier against unwanted sound. When you insulate with ENERTITE, you benefit from improved energy efficiency, an affordable option for superior insulation, increased comfort, excellent sound control, healthy indoor air quality, good adherence to wall (will not sag), and an environmentally friendly product.

    ENERTITE US Benefits
    Superior insulation performance, Ease of application, Non-fibrous, Sound control

    APPROVALS AND CREDENTIALS:
    ASTM E-84*, Listed at Intertek ETL Semko, NFPA 286

    Part #: N/A
  • 220 +

    Foamsulate 220

    Foamsulate 220 is a two-component, medium density, one to one by volume spray applied polyurethane foam. To produce Foamsulate 220 requires the use of an “A” component (ISO) and a blended “B” component (RESIN) which contains ZERO ozone depleting blowing agents, catalysts, polyols and fire retarding materials. Foamsulate 220 is an insulation system designed for use in residential, commercial and industrial applications. Use in lieu of more traditional forms of insulating materials such as fiberglass, cellulose or other loose fill products.

    Typical area’s where spray polyurethane foam is applied are:

    EXTERIOR WALLS, VENTED ATTICS, UN-VENTED ATTIC ASSEMBLIES, BETWEEN FLOORS, FOUNDATIONS CRAWLSPACES, HVAC DUCTS, FLUID TANKS, COLD STORAGE UNITS

    Foamsulate™ 220 is a 2.0 LB density closed cell insulating material. Foamsulate™ 220 is designed for use where insulation systems require superior air barrier characteristics along with the ability to minimize moisture infiltration. Foamsulate™ 220 has a high R-value rating while providing structural enhancement due to its rigid nature when cured. When properly installed by a trained contractor Foamsulate™ 220 quickly expands to fill the cracks, crevices, gaps and voids that exist in every structure. In addition Foamsulate™ 220 will conform to the curves, irregular surfaces and spaces to form a superior thermal envelope around your entire structure.

    Part #: N/A
  • form +

    Foamsulate 50

    Foamsulate 50 is a two component, light density, one to one by volume spray applied polyurethane foam. To produce Foamsulate 50 requires the use of an “A” component (ISO) and a blended “B” component (RESIN), which contains ZERO ozone depleting blowing agents, catalysts, polyols and fire retarding materials. Foamsulate 50 is an insulation system designed for use in residential, commercial and industrial applications. Use in lieu of more traditional forms of insulating materials such as fiberglass, cellulose or other loose fill products.
    Typical area’s where spray polyurethane foam is applied are:
    EXTERIOR WALLS,INTERIOR WALLS,VENTED ATTICS,UN-VENTED ATTIC ASSEMBLIES, BETWEEN FLOORS,CEILINGS

    Part #: N/A